GENERALLY AT ALL BIKES
There's a click noise with every pedaling (increases with the weight)
The pedals are not tightly drawn. Change pedals.
There's a loose in the crank cheek, loose in the base bearing.
Scratching noise is heard when pedaling
Check that the carriage block is taken off and that none of the covers is scratching.
There's a click noise and a squeak noise when pedaling
Untighten the chain a bit.
It's not possible to cycle with an even weight/
It's hacking when putting on weight/The bike increases weight after a few minutes.
Clean the break surface at the fly wheel and change the brake belt.


ELECTRONIC METER 731 AND 915
The meter doesn't show speed, RPM or distance
Check that the magnet on the chain wheel hasn't fallen off. Eventually change crank sensor.
Check that all connectors are tightly put together.
The meter shows no or incorrect heart rate
Check the earlobe pulse sensor and the batteries. If the fault remains - change meter.
The meter shows doubtful numbers
Change battery. If the fault remains - change meter.
It's hard to get an even weight. The scale is jumping when pedaling
Clean the brake surface at the fly wheel and change the brake belt.


817 E
The meter doesn't show any RPM
The fault could be that the connection at the extension cables aren't tight enough. Check the black contact on the meter. There can be a fracture on the cable.
The meter doesn't react when pushing the bottoms
Change meter.
The meter is beeping
Change battery. If the fault remains - change meter.
The meter (mechanical) doesn't work when pedaling
Check the hub connection if it's broken or if the cable has a fracture.


818 E
Problems with the meter
See 817 E.
The pendulum swings when pedaling, uneven weight
Clean the brake surface and change the brake belt.
The scale at the instrument cover doesn't show the same value as the weight lever
Adjust the scale according to the operators manual.


824 E
Problems with the meter
See 817 E.
The weight is hacking when letting the weight basket down
Clean the brake surface and eventually change brake belt. Also check that the brake belt is not crossed on the fly wheel.
The brake belt falls off the fly wheel
Tighten the brake belt a bit. Check the belt so it goes straight between the frame for equipment and the fly wheel.


834 E
Problems with the meter
See 817 E.
The program in the computer doesn't start when letting the weight basket down
Check that the magnet in the tension device hasn't fallen off. Also check the cables.
The magnet in the tension device doesn't reach the sensor when the weight basket has been let down
The brake belt is to tight.


715
The speedometer shows to high speed
Change meter
The speedometer shows no reading when pedaling
Check the hub connection and the wire. If those are free from defects - change meter.
The brake belt is hacking when putting on weight
Change belt and clean the brake surface.


808-809
There are noise from the hub connection
Change the angle of the hub connection. If this doesn't help, change the hub connection and / or the cable. If it still doesn't help, change meter.
The speedometer shows to high speed
Change meter




P. H. HAS-MED Tel +48 33 812 29 64 email: biuro@hasmed.pl

-

Przedstawiciel firmy Monark Exercise AB w Polsce.